Enhancing lithium storage rate and durability in sphalerite GeP by engineering configurational entropy†
Author affiliations
* Corresponding authors
a School of Materials Science & Engineering, Georgia Institute of Technology, Atlanta, GA 30332, USA
E-mail: wenwuli@skku.edu
b Department of Chemistry, National Taiwan Normal University, Taipei, Taiwan
c Faculty of Materials Science and Engineering/Institute of Technology for Carbon Neutrality, Shenzhen Institute of Advanced Technology, Chinese Academy of Sciences, Shenzhen 518060, China
d School of Chemical Engineering & Advanced Materials, The University of Adelaide, Adelaide, SA 5005, Australia
e School of Chemical Engineering, Sungkyunkwan University (SKKU) 2066, Seoburo, Jangan-gu, Suwon 440-746, Republic of Korea
Abstract
Monoclinic GeP with a layered structure, featuring a large capacity, low plateau, and high initial coulombic efficiency (ICE), has been demonstrated as a promising alternative anode material for Li-ion batteries. However, its semiconductor feature and overutilization of expensive Ge pose a significant obstacle to its further advancement. To further improve electronic and Li-ionic conductivity, and reduce the cost, via a mechanochemical method, we synthesize a cubic GeP-based compound, ZnGeSiP3, which possesses a triple cation-mixed sphalerite lattice, affording metallic conductivity and rapid Li-ion diffusion, and thereby outperforms monoclinic GeP due to enhanced conformational entropy, as verified through theoretical calculations and experimental analyses. Various characterization techniques, such as operando X-ray diffraction (XRD), Raman spectroscopy, and X-ray photoelectron spectroscopy (XPS), confirm the reversible storage of Li-ions within ZnGeSiP3 via intercalation and subsequent conversion reactions, yielding a notable reversible capacity of 1638 mA h g−1 with an ICE of 92% at 100 mA g−1. The graphite-modified ZnGeSiP3 composite exhibits exceptional long-term cycling stability, retaining 981 mA h g−1 after 1600 cycles at 2000 mA g−1, and ultrahigh rate performance, maintaining 568 mA h g−1 at 22 000 mA g−1, surpassing most previously studied anodes. Drawing inspiration from the favorable entropic effects, we synthesize high-entropy cation-mixed sphalerite-structured GeP-based compounds, including CuSnAlZnGeSiP6, CuSn (or Al)ZnGeSiP5, and SnAlZnGeSiP5, as well as quaternary cation-disordered sphalerite-structured GeP-based compounds of Cu (or Sn, or Al)ZnGeSiP4. Furthermore, we synthesize high-entropy sphalerite-structured GeP-based compounds ZnGeSiPSSe and ZnGeSiP2Se (or S) with disordered cationic and anionic compositions, effectively addressing the challenge of incompatible multiple anions and cations. The phase formation mechanisms of these sphalerite-structured GeP-based compounds can be attributed to their negative phase formation energies, benefiting from the elevated conformational entropy. Crucially, all the aforementioned sphalerite-structured GeP-based compounds have metallic conductivity and showcase superior electrochemical Li-storage properties, including high capacity, high ICE, small polarization loss, and suitable operating potential. Broadly, the high conformational entropy strategy can serve as a new design paradigm for high-performance and cost-effective anodes for LIBs and beyond.
About
Cited by
Related
Download options Please wait...
Supplementary files
Article information
- Article type
- Paper
- Submitted
- 24 Mar 2024
- Accepted
- 09 Jul 2024
- First published
- 08 Aug 2024
Energy Environ. Sci., 2024, Advance Article
Permissions
Request permissions
Enhancing lithium storage rate and durability in sphalerite GeP by engineering configurational entropy
Y. Li, J. Wang, T. Liu, X. Li, Z. Guo, M. Liu and W. Li, Energy Environ. Sci., 2024, Advance Article , DOI: 10.1039/D4EE01329H
This article is licensed under a Creative Commons Attribution-NonCommercial 3.0 Unported Licence. You can use material from this article in other publications, without requesting further permission from the RSC, provided that the correct acknowledgement is given and it is not used for commercial purposes.
To request permission to reproduce material from this article in a commercial publication, please go to the Copyright Clearance Center request page.
If you are an author contributing to an RSC publication, you do not need to request permission provided correct acknowledgement is given.
If you are the author of this article, you do not need to request permission to reproduce figures and diagrams provided correct acknowledgement is given. If you want to reproduce the whole article in a third-party commercial publication (excluding your thesis/dissertation for which permission is not required) please go to the Copyright Clearance Center request page.
Read more about how to correctly acknowledge RSC content.
Social activity
Tweet
Share
This article has not yet been cited.
Loading related content